Riser

Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees. - 41-Thermal Lifetime Warranty - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

- Molded from multi-directional carbon/Kevlar weave for superior strength - Integrated crossbar for exceptional stiffness - Knurled stem clamp area for improved stem grip - Rider weight limit: 135lbs

Rise and shred. A lightweight carbon MTB riser bar born to rip. Where it thrives: In competition, challenging trails What it's built for: Precision, control, durability Highlights: - Carbon fiber construction - Lightweight - 780mm wide, 9 deg backsweep, 4 deg upsweep, 31.8 diameter

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise

- Patented oval bar shape increases vertical compliance and combines the best characteristics of 31.8 & 35.0mm diameter handlebar standards - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams

An adventure bar from Ritchey. Extra wide with subtle rise and sweep, these bars are perfect for handling dodgy terrain while packing a week's worth of supplies. - 6061 alloy - Bar Clamp Diameter: 31.8mm - Width: 800mm - Rise: 30mm - Back Sweep: 27 degrees - Upsweep: 27 - Weight: 355g

Just enough rise, and at the right width, Ritchey Trail Rizer is a heavy-duty performer at entry-level pricing. - Material: double-butted 6061 alloy - Width: 780mm - Rise: 20mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 385g

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable, as well as the lightest, bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter

- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

- AL7050 tubular alloy construction - 31.8mm clamp diameter - 800mm width - 7° back sweep - ISO-Mountain safety certified - 310-350g (Depending on rise dimension)

- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°

Brendan Fairclough's signature handlebar is an homage to the effortless style, grace, and speed exemplified by Brendan's every move. The BF800 Brendog signature handlebar, which has been developed and tested on the World Cup DH circuit for almost three years to perfect the feel he demands for World Cup-caliber speed. Creating the perfect combination of rise, width, bends, sweep, flex, and responsive damping is not an easy task, but DEITY has perfected the ability to deliver the best-feeling handlebars with unparalleled strength time-and-time again. Utilizing Brendan's preferred 8-degree backsweep with our favorite 5-degree upsweep gives this bar a more aggressive positioning to attack the gnarliest DH trails in the world. At an 800mm width and featuring a 30mm rise, our proprietary Gradient Butting Technology coupled with our Mono Heat Treatment Procedure delivers a handlebar that is more than 20% stronger than any other handlebar from our competition at this weight category. We guarantee you will look as good as Brendan riding his signature BF800 Brendog Handlebar while you're pushing your limits to match his speed and style! So get your hands on DEITY's latest and greatest rider collaboration, designed to elevate your ride to podium status! - The Brendan Fairclough Signature Handlebar - Designed for DH / Enduro / All MTN applications - Developed and tested rigorously for nearly 3 years on the World Cup DH circuit - Incredibly detailed two-tone bead blast and polished ano finish - Brendog signature 8-degree bend / backsweep by 5-degree upsweep - 800mm width - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Mono Heat Treatment Procedure for increased strength - Stiffness for tracking yet compliant for endless chatter and big hits - Wider center bore spacing for unrivaled stability - Designed for maximum ride quality with a 31.8mm bore - Alignment control markers for perfect set up and spacing of your levers - Features measured cut marks and center alignment detail - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - 30mm rise (343 grams)

After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams

TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly. - Aaron Ross signature - Proven 41-Thermal processed 4130 chromoly - Multi-Butted, traditional 7/8" crossbar for strength

Fast, light, sporty and agile. Who would have thought that the SQlab ergonomics experts are also quite good in high-tech, material science and carbon manufacturing. - Stability: Syntace and SQlab are the only manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Ergonomics: With a sporty sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for sporty MTB handlebars. - Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. - Area of use: Marathon, Cross Country and Trail bikes with sporty sitting position and under 130mm suspension. The pictured stem is not included in the scope of delivery. The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - Area of use: MTB race - Width: 740mm - Shortened maximum width: 720mm - Backsweep: 16° - Upsweep: 4° - Material: carbon - Clamping: 31.8mm - Downsweep: 0° - Stretch: 0mm

Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- Light enough for XC, but strong enough for Enduro and Trail - Carbon composite construction - Reinforced and textured clamping areas, with markers for accurate shortening - 5/8 degree with +10mm setback

Made from heat-treated aluminum, tested to Motocross safety standards Marked for custom cut length

- Custom swaging process results in the ultimate strength-to-weight ratio - Wide 7075 bars with a 35mm clamp area, 5 degree upsweep and 8-degree backsweep - Features two-tone decals with easy-cut markings

- 6061-T6 polished aluminum finish in black or silver - Grip Area Diameter: 22.2mm - The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers - Bends forward 22-degrees before bending backwards - A design collaboration with Dream Cycle Vancouver

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions

- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos

Ideal for dialing in fit on bikes with tall front ends, the 2x Flat bar can be mounted with positive or negative 5mm rise to achieve the ideal riding position. Constructed of HMF UD carbon, the 2x Flat bar is perfect for race-worthy weight savings on any XC rig. - Carbon monocoque construction - Rise: +/- 5mm - Width: 710mm - Not bar end compatible - Matte UD finish - 183g

- Cam Zink designed bars with unique upsweep and backsweep - 9.5 deg bend x 4.5 deg upsweep - Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail - Made from custom gradient butted 7075 T6 aluminum - 800mm wide, 31.8mm clamp - Third party online sales strictly prohibited by manufacturer

CrMo with internal taper for best strength-to-weight

Odyssey Shortcut BMX Handlebar - Butted 20mm crossbar - 1.8/1.3mm thick, multi-butted main tubing - Large radius bends for greater durability - Post-weld heat-treated for added strength

Burgtec's first range of signature handlebars developed with, yes you've guessed it! Josh Bryceland. Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn't one of those guys that's 'crazy' on setup, but he knows what he wants. - 38MM RISE: Back in 2018 Josh's idea was for something more versatile that he could use on all his bikes. After testing various prototypes, he finally narrowed it down to a 38mm rise bar, the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So, the 38mm "Ride High" was born. The same unsurpassed comfort and durability as all of the Ride Wide range, but just a little Higher. - 50MM RISE: It's fair to say high rise bars have taken a back seat over the last decade much in part to the increasing wheel sizes pushing up front ends of bikes and riders trying to match their previous riding positions. After first coming to us a little over 3 years ago and deciding on the 38mm rise bar Josh wanted to quite literally raise the bar once again. We'd previously prototyped the 50mm bar alongside the 38s but at the time just felt they looked out of place. With more riders moving towards 29ers we felt the market just wasn't ready for them. Josh quickly adapted to the 38s but still felt he was running a lot of stack on his bikes. So with more frequency, he was popping in to Burgtec HQ asking if we had any of the 50mm rise bars left. In the end, we ran out of prototype bars, and Rats a very persuasive guy so we just decided to go into production with the 50s. For Josh, he loves how the higher rise allows for more maneuverability as well as getting rid of the excess stack height. Plus, being a taller rider, they keep his weight where he wants it and freely admits "It's easier on my back". The bars are a natural fit for Jump bikes but as Josh and the boys show they are equally at home on bigger travel trail bikes too. - Width: 800mm - Rise: 38mm, 50mm - Available in 35mm clamp only. - Backsweep: 9° - Upsweep: 5° - Weight: 38mm Rise = 346g, 50mm Rise = 391g

The perfect combination of form, wall thickness and diameter with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position, while the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter

The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel! - 7/8" (22.2mm) BMX style clamp (so you'll need a BMX stem to use them) - 4” rise - 28” width

- Reverse Components flagship handlebar reduces vibrations which can cause fatigue on longer runs over rough terrain\n- Carbon construction with Seismic vibration damping technology\n- Unique carbon laminate process makes a handlebar that is both lightweight and strong \n- Tested extensively at the EFBE laboratory in Germany, a pioneer in DIN 79100 test methods

- Initially designed and built for trials, it soon became apparent this handlebar can serve as a high-rise bar for almost any discipline - Due to its 76mm rise and pleasing 9-degree backsweep, this handlebar affords an upright position that is comfortable enough for leisure and daily commuters - High rise 7050-T6 aluminum bar

Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for race quality at an attainable price. - Material: triple-butted 7050 alloy - Width: 760mm (with cutting marks*) - Rise: 20 and 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 242g - Cutting must be done by a professional mechanic or Ritchey authorized dealer, though cutting or modifying any Ritchey product will void the warranty.

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Width: 740mm - Back Sweep: 9 degrees - Weight: 380g - Material: Alloy

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: carbon fiber - Width: 780mm - Rise: 15mm - Backsweep: 9° - Upsweep: 6° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 199g

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20 or 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 284g

With a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the Comp 10D Rizer. Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning. All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favorite trails from Moab to Houffalize or your local runs, the Ritchey Comp 10D Rizer bar will help deliver a lifetime of great mountain bike experiences. - Material: double-butted 6061 alloy - Width: 800mm - Rise: 20mm - Backsweep: 10° - Upsweep: 4° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 385g

- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

Based on team rider feedback, Sunday introduces the new Nightshift Handlebars. - Laboratory tested and team proven - 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - Traditional 7/8" crossbar for strength - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection

Fast, Light, and Agile. SQlab ergonomics experts are not only quite impressive in just ergonomics, but also very well versed in high-tech, material science and carbon manufacturing. Ergonomics: With an aggressive sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for aggressive MTB handlebars. Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study, we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. Stability: SQlab is one of only two manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Area of use: MTB Race - The 12° backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain - The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - This bar utilizes a 31.8mm clamping area. If you have a 35mm stem, please refer to our shim kit.

- Full UD carbon construction - Textured surface at bar clamp and grip areas - 35mm oversized clamp diameter - 800mm width - 7° back sweep - 5° upsweep - ISO-Mountain safety certified - 225g

The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind. - UD carbon and AL6066 material - Carbon Structural Integration (CSI) - Textured stem clamp zone - 18mm rise - 9° backsweep, 4° upsweep - UD carbon finish

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

- AL6066-T6 tubular alloy construction - 35mm oversized clamp diameter - 800mm width - 7°/8° back sweep (Depending on rise dimension) - 5° upsweep - ISO-Mountain safety certified - 290-335g (Depending on rise dimension)

Origin-8's Pro Urban Riser Handlebar is a wonderful city companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.