Parts & Accessories

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers. The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers. Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach. Given their modular design, the bags can also be used individually when you're out on short trips. FEATURES: - Each unit in the modular system can also be used individually - Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L - Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers

For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Surly Front Rack Hardware

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14

- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non-scratch hooks

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Topeak handlebar bag fixer for eBikes with display units.

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

The Rando Pocket is an accessory bag fit to carry a small repair kit, wallet, keys, a cell phone, or a small point-and-shoot camera. Designed as the perfect match for our most revered bicycle bags, the Rando Pocket attaches to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack, and mounts to the Wald 137 Front Basket to upgrade any kit. The Rando Pocket is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 1 plastic bottle rescued from ocean beaches. Add versatility to your favorite set-up: The Rando Pocket weaves securely onto the Wald 137 Basket using standard MOLLE attachment and feeds onto our Kestrel Handlebar Bag, Anchor Hip Pack, and Ardea Pack to add space for your small belongings. The Rando Pocket is padded to protect your point-and-shoot camera and is the ideal pouch to keep repair supplies at arm's reach. Because the attachment mechanism is universal to the MOLLE system, our Rando Pocket is the perfect addition to any bag that features MOLLE webbing. Cool Features: - MOLLE attachment - Single-handed closure - Fully padded with closed-cell foam Attaches to the following bicycle bags: - Kestrel Handlebar Bag - Ardea Pack - Merlin Randonneur Bag - Anchor Hip Pack Dimensions: - Measurements: 5.25"h X 4"d - Capacity: .8L - Weight: 2oz Built with: - Recycled ECOPAK™ EPLX400 - Packcloth - Closed Cell Foam - Nylon Webbing

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

Mounting set with cable fixing for ORTLIEB handlebar bags and baskets. - Ideal for use with second bike - Reflective tape on front - Universal cord mounting - Holder compatible with bags and baskets of other brands - Attention: not suitable for carbon handlebars

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

Bolt-on eyelet for use with Tubus Lowrider racks and bags requiring bungee hook attachment.

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

- All-weather polypropylene basket - Fully adjustable aluminum and composite quick-release bracket - Handlebar mount is compatible with 22.2mm and 31.8mm handlebars

- Hardware included - Fits all Sunlite Gold-Tec racks - Cut to length