Tires/Tubes

The Primo Comet Recumbent is a fast-rolling, high-pressure tire.

The P Zero Race TLR is the most performing tire in Pirelli’s portfolio, as well as being the first tire with a tubeless technology entirely made in Italy. The design features SpeedCore technology in a 120tpi casing, utilizing a layer of compound mixed with aramid that covers the inner layer of the tire, improving the smoothness and the resistance of the rubber. The result is a less stiff, but faster tire. The compound on the other hand, maintains the same advanced SmartEVO technology, commonly found in other high-performance tires throughout the P Zero range. - SpeedCore is an innovative tubeless-ready construction that consists of a thin air-tight layer of rubber compound infused of aramid particles. This layer covers the internal part of the tire and thanks to the presence of the aramid into the rubber blend, it allows for better mechanical resistance, improved air retention and overall greater flexibility - SmartEVO compound uses a blend of polymers to provide maximum grip with a low rolling resistance, allowing for maximum speed and control - 700 x 28 and larger sizes are compatible with hookless rims, 700 x 26 size tires are not hookless compatible - Hookless rims subject to ETRTO 5bar/73psi max pressure limitation

The Gravelking SK maintains its position as the benchmark against which all gravel tires are measured. - Ideal for gravel, dirt, and rough pavement - TuffTex boasts a supple, high thread count casing fortified with precisely engineered bead-to-bead puncture protection - BeadLock is engineered to accommodate a broader range of rims, including both hookless and clincher types. In most instances, mounting the tire can be effortlessly achieved with a standard floor pump - ZSG GRAVEL Compound is crafted from a proprietary ZSG (Zero Slip Grip) material to ensure remarkable resistance to temperature and weather fluctuations. This consistent rubber performance across a spectrum of temperatures provides lower rolling resistance and improved grip - Folding (Aramid) Bead - Tubeless and Hookless Compatible in widths 700 x 30C and wider, and all 26", 650B/27.5" and 29” versions

GravelKing SK Plus has a semi-knobby tread pattern with a super-tough puncture belt for aggressive gravel roads. GravelKing SK Plus has side reinforcement with Protite and a bead-to-bead nylon puncture belt, resulting in a 4-ply, super-tough casing.

The Gravelking SK Plus enhances protection precisely where it's needed, ideal for navigating the most challenging terrain. - Ideal for gravel, dirt, and rough pavement - TuffTex+ increases tire resilience with a dual layer of bead-to-bead TuffTex material, providing additional puncture resistance and heightened security in the most challenging conditions - BeadLock is engineered to accommodate a broader range of rims, including both hookless and clincher types. In most instances, mounting the tire can be effortlessly achieved with a standard floor pump - ZSG GRAVEL Compound is crafted from a proprietary ZSG (Zero Slip Grip) material to ensure remarkable resistance to temperature and weather fluctuations. This consistent rubber performance across a spectrum of temperatures provides lower rolling Resistance and improved grip - Folding (Aramid) Bead - Tubeless and Hookless Compatible - Tubeless Ready up to 60 PSI

The RiBMo is the essence of what a good urban tire is. A perfect blend of weight to strength and riding comfort with a proprietary ProTite Tech puncture material. - Urban/Commuter tire - 60-95 PSI

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level. - 5-pack

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary ‘Straight through’ internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. - Big Bore Lite valves feature a standard Presta valve head design, while offering up to 230% higher air flow than traditional Presta valves - Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride - Stainless steel ball valve with seals and O-rings - Serviceable design with spanner flats on the head, lever and body - 4-way tire insert air flow base is compatible with most tubeless inserts - 4mm machined hex key slot for easy installation and removal - Supplied with various rubber bases to optimize fit and seal with multiple rim types - Larger Stem Length: 45mm - Overall Length with cap: 75mm - Suggest Rim Depth: 25 - 30mm

- Each box contains 20 patch kits - Each kit contains 6x Glueless Patches (0.98''), 1x Sandpaper - Travel Size—Can be kept inside a jersey pocket, tool bottle or saddle bag!

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

The Maxxis Ardent is a light duty trail tire that rolls fast in dry conditions. For similar rolling speed with improved braking and cornering performance, check out the Rekon.

The Maxxis Ardent is a light duty trail tire that rolls fast in dry conditions. For similar rolling speed with improved braking and cornering performance, check out the Rekon.

The Maxxis Ardent Race shares many features with the Ikon – small, ramped center tread – but offers improved cornering performance with more substantial side knobs.

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The DTH is lightweight for quick acceleration, but tough enough to handle abuse of hard riding. Intended use: dirt, flat, park, street

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Gravel and dirt road racing tire - Dual-Compound for longevity - Gravel-specific tread pattern - Tubeless Ready (TR) Maxxis' first gravel-specific tire, the Rambler, is designed with the volume you need for comfort and the tread you need for speed and control. Tightly packed center knobs are ramped for rolling efficiency on hardpack roads, and spaced-out side knobs provide predictable cornering in varied terrain.

When the road conditions are unknown, choose the Maxxis Ravager. Large side knobs provide extra traction in deep, loose gravel and mud.

The Reaver tire is faster, lighter, and even more durable than the venerable Rambler. A low-profile tread design uses diamond knurling to reduce rolling resistance and enhance grip in dusty or loose conditions. Paddle knobs arranged in sets of three provide extra bite under hard braking. The side knobs are spaced closely together and are staggered for consistent cornering performance. A sipe (groove) in each of the side knobs allows them to flex and conform to the terrain, improving traction. - Race-ready tread design, intended to go fast on gravel and dirt - Tubeless-ready 120 TPI casing with EXO sidewall protection - Dual compound to maximize wear