Pedals

The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement

The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.

- City/road half clips - With reflectors - No straps needed - Resin

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm

- One-piece ABS resin body - Molded pins - 320g pair

- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair

Squatch platform pedals have a low-profile, nylon construction and molded traction studs that are easier on the shin in the event of a crash or pedal slip. - EPB bearing system - Spindle size: 9/16-inch

Customize and optimize the shoe/pedal interface. - Refine the interface between the shoe tread and pedal body - Four (4) contact sleeves - 1mm thickness

Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair

Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Crank boots designed for RaceFace Next R cranksets.

Crank boots designed for RaceFace Next SL G5 cranksets.

Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Our SPDTM compatible mechanism gives you 5° of float and a 12° release angle with no unwanted play between the cleat and binding. OneUp’s clip mechanism lets you fine tune the feel of your pedals and has a wider range of spring tension adjustment than Shimano. The included cleat spacers and removable pins allow for the perfect fit with any shoe.

- Plastic nylon molded body - Chromoly spindle - 318g pair

- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair

The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems. - 10mm SPD/MTB compatible cleat screws - 4mm Hex countersunk M5x0.8 - Compatible with most 2-hole cleats - Black oxide-coated carbon steel - 25 pieces

Beefy heavy duty knurled nylon pedal with 14 pins per side.

- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)

Get back on the road with original equipment pedals. Product details: - Dialed fit for kid-sized feet - Sold in pairs

Get back on the road with original equipment pedals. GENUINE REPLACEMENT PARTS Keep your bike operating as it should. PRODUCT DETAILS - Dialed fit for kid sized feet - Sold in pairs

Get back on the road with original equipment pedals. - Dialed fit for kid sized feet - Sold in pairs

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

- Chrome plated steel strapless toe clip - Hardware included

- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair

- Nylon co-molded body with rubber tread surface - Reflectors included - 9/16"

Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface

The Cleat Shim-Spacer helps compensate for leg length discrepancies.

- One-piece nylon body - Chromoly spindle - Toe clip compatible - 407g pair

- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

Get that fresh cleat feel These solidly-built cleats work with Bontrager road pedals or any Look Cycle’s KÉO-compatible clipless pedals. Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Replacement cleats for all Look Cycle’s KÉO®-compatible road pedals - Directly compatible with Bontrager Comp Road pedals - Set includes 1 pair

The Dak pedals are the Dakota Roche signature model that feature 14 large hexagon molded pins on both sides for maximum grip. - Slim profile - Large surface area - Heat treated 4130 spindle - 9/16"

Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g

- One-piece resin body - Barefoot friendly rubber surface - Includes reflectors

- Nylon body w/steel cage - Chromoly spindle - Toe clip compatible (clips included) - 547g pair - 9/16-inch pedals

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

An affordable pedal option for city cruiser bikes. Features a rubberized cage.

A set of durable, SPD-compatible replacement cleats that come with all mounting hardware. Get that fresh cleat feel These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Compatible with all 2-bolt SPD-style pedals - Directly compatible with Bontrager Comp MTB and Commuter pedals - Includes mounting hardware - Float: 4-deg

- Nylon clips - Woven straps - For ATB or hybrid use

- One-piece resin body with rubber surface for grip - Boron spindle - 400g pair

- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware

Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins

Aluminum body with plastic cage overmolded.

Good things come in pairs. Put your foot down! Electra replacement pedals are perfect upgrades. This updated design connects you to your bike with an efficient and lightweight pedal. Product details: - Nylon body - 9/16" fits most bicycles with three-piece cranks - Weight: 380g

Simple functionality: that's what Electra's Deluxe Block Pedals offer your favorite cruiser. With plenty of platform for your sneakers, the Deluxe Block Pedals are as comfortable as can be for your entire ride.

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float

- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included

- Real leather material - Classic design fits most caged pedals